Fixed Data Type Marking
| S. No. | Specification | RP – 50 | RP – 100 | RH – 200 | RH – 500 |
|---|---|---|---|---|---|
| (A) | Operation | ||||
| 1 | Operating Medium | Pneumatic | Pneumatic | Hydraulic | Hydraulic |
| 2 | Operating Pressure | 5 to 6 Kg/Cm2 | 5 to 6 Kg/Cm2 | 50 to 60 Kg/Cm2 | 50 to 60 Kg/Cm2 |
| 3 | Tonnage Standard | 2 Tons | 2 Tons | 4 Tons | 4 Tons |
| 4 | Tonnage Optional | – | – | 6 & 8 Tons | 15 Tons |
| 5 | Cushion in mm | 7 | 7 | 20 | 20 |
| 6 | Ram Stroke Standard in mm | 75 | 75 | 100 | 200 |
| 7 | Ram Stroke Optional in mm | 125 | 125 | 150 & 200 | 200 |
| 8 | Manual Table Rise | 150 | 150 | 150 | 150 |
| (B) | Making Data | ||||
| 1 | Max Number of Lines | 2 | 2 | 4 | 6 |
| 2 | Max Character Size in mm | 3 | 4 | 6 | 6 |
| (C) | Controls | ||||
| 1 | Standard Controls | Pneumatic | Pneumatic | Electrical Contactor Logic | Electrical Contactor Logic |
| 2 | Optional Controls | Electrical or PLC Control | Electrical or PLC Control | PLC Control | PLC Control |
| 3 | Operations | Optional Operations Switch | Optional Operations Switch | Electrical Foot Switch | Electrical Foot Switch |
| 4 | Optional Operations | Two Hand Push buttons optional | |||
| (D) | Tooling required for marking (Selection of tooling depends on the type of component to be marked) | ||||
| 1 | Roller Cradle | 4 | Special Fixtures to suite components | ||
| 2 | Marking Holders | 5 | Stud Arbour Fixture | ||
| 3 | Knurl Holder with Bracket | 6 | Special holders to suite special Types | ||
What is roll marking machine?
Roll Marking machine is used for quick and easy marking or stamping, numbering and knurling the parts with round surfaces, both hollow and solid. They can also be used to mark flat surfaces, but with some suitable fixtures. The roll stamping machine provides high-quality marks without exerting much pressure or force on the surface.
Our roll marking machines provide high-quality marks in minimum force or pressure. The marking specifications in the roller marking machine are set at default, which can be adjusted according to requirements. They can be operated both manually and automatically, depending upon the requirements and convenience.
Types of Roll Marking Machines:
Pneumatic Roll Marking Machine
The pneumatically operated roll marking machine efficiently conducts its marking or stamping work on round surfaces made of aluminium, steel, brass, etc. Its easy operation allows fast stamping on round surfaces as well as on flat surfaces, with the help of some fixtures. The high-quality impressions are made with complete precision, and in controlled force or pressure. The depth of required markings can be adjusted in a variety of options available.
Benefits of Applied Technosystems Roll Marking Machine:
- Flexible setup
- Adjustable setting
- Easy operation
- High-quality marking work
- Strong and reliable machine frame
- Precision marking
- Economical operation
Hydraulic Roll Marking Machine
The hydraulic roll machine is used for creating marks or stamps on tools of various shapes and sizes. The best part of hydraulic toll marking machine is, that it can be used on a wide range of tools or parts like taps, engines, pistons, spark plugs, elbows, bends, gears, axles, bearings, etc.
Features of Applied Technosystems Hydraulic Roll Marking Machine:
- Electrically conducted hydraulic operations
- Well controlled table-pressure for required uniform depth marks
- Adjustable marking capacity
The benefits of Applied Technosystem Hydraulic Roll Marking machines are:
- Easy operation
- Automatic adjustment for correction
- Sturdy and reliable machine frame
- Stress-free marking
- Precision marking or stamping on both round and flat surfaces
- Capable of marking serial numbers automatically
- Provides adjustable daylight for easy operation on all shapes and sizes, using fixtures and tools
Applied Technosystems uses following Roll Marking Tools in Roll Marking Machines:
Roller Cradle – A Roller Cradle is used to rotate, position and support solid or heavy-walled round parts for marking. Inside the part, a thin-walled tube is inserted to provide support at the back which helps prevent distorted marking and achieve the perfect as required.
Marking Holders – The marking holders are available in various styles like round, radial, straight and wedge styles. These holders are manufactured through advanced technology with specified steel material by a skilled personnel. The marking tools are specially treated by heat to provide uniform impressions in various design patterns. These impressions or markings provide different designs to suit to customized requirements.
Knurl Holder with Bracket – The knurling tool is used by rolling it against the surface of material to create patterns of straight lines, slant or angled lines and crossed lines on it. The same roller contains both the pattern and its reverse design. These patterns are identified as ‘male’ and ‘female’ design patterns.